Custom metal labels and logo plates for clothing, bags and accessories – die-cast or stamped, plated in the finish you choose and always nickel-free. We are the manufacturer: tooling, casting, plating and inspection all happen in our own production in Bulgaria.
What metal branding adds
A metal logo plate is branding you can hold. On a waistband, a coat pocket, a backpack flap or the side of a cap, a small piece of polished or brushed metal gives the product weight, precision and a sense of value. Metal resists abrasion, keeps sharp edges for years and can be finished to match the zips, snaps, buckles and eyelets on the same item, so the whole product speaks one design language.
Our range covers slim logo bars, rectangular plates, round and shaped emblems, three-dimensional badges and engraved tags. All metal products we make are nickel-free; where a finish is called “nickel-look”, that describes the silver-grey colour only.
Choosing the metal
| Metal | How it is made | Strengths | Typical products |
|---|---|---|---|
| Zinc alloy | Die-cast in a steel mould | 3D relief, cut-outs, rounded edges, takes almost every finish | Shaped emblems, bag badges, detailed logos |
| Brass | Stamped from sheet | Warm colour, solid feel, premium polish | Flat or lightly embossed logo plates |
| Aluminium | Stamped or cut, anodised or printed | Very light, colourful anodised surfaces | Caps, lightweight garments, sportswear |
| Stainless steel | Stamped or cut, brushed or polished | Excellent corrosion resistance, robust | Outdoor gear, workwear, bags |
Zinc alloy is our most versatile option when the logo has depth or an unusual outline, as the mould can create several relief levels in one piece. Brass suits elegant flat plates; aluminium keeps lightweight garments light; stainless steel is the dependable choice for products that live outdoors.
Finishes, colours and decoration
- Plating colours – gold, light gold, silver, gunmetal, black, rose gold, copper and nickel-look silver.
- Antique effects – antique brass, antique silver or antique copper, with darkened recesses that make the relief stand out.
- Textures – high polish, satin, matt, brushed or sand-blasted, and combinations such as a matt plate with a polished raised logo.
- Enamel – soft or hard enamel fills in recessed areas, matched to Pantone references.
- Laser engraving – fine text, serial numbers or small marks without a dedicated tool, also for variable series.
- Protective coating – clear e-coat or lacquer to protect the finish from abrasion and humidity.
Matching finishes across a collection is easiest when one manufacturer controls the plating. We keep finish references on file, so a gunmetal plate reordered next season matches the first batch.
How the label is fixed
| Fixing | How it works | Good for |
|---|---|---|
| Prongs (claws) | Two or four prongs pierce the material and fold over a backing plate | Jackets, trousers, leather goods – clean front |
| Stitch holes | Small holes at the ends or corners for sewing | Waistbands, knitwear, cuffs |
| Screws or rivets | Threaded posts or rivets through the material | Bags, luggage, heavy leather |
| Adhesive backing | Strong double-sided adhesive pad | Gift boxes, hard goods, packaging |
On fine or stretchy fabrics we recommend a backing plate or a small reinforcement patch behind the prongs. It spreads the load and keeps the plate level after washing and wear.
Popular sizes
| Format | Size (mm) | Thickness (mm) | Where it goes |
|---|---|---|---|
| Slim bar | 20 × 5 | 0.5–0.8 | Knitwear, cuffs, small accessories |
| Small plate | 30 × 8 | 0.6–1.0 | Waistbands, pockets, caps |
| Medium plate | 40 × 10 | 0.8–1.2 | Jackets, trousers, bags |
| Large plate | 50 × 15 | 1.0–1.5 | Bags, outerwear, leather goods |
| Round emblem | Ø 15–25 | 1.0–1.5 | Caps, shirts, wallets |
| Shaped badge | 25–40, any outline | 1.0–1.5 plus relief | Bag flaps, backpacks, coats |
Custom outlines and dimensions are produced to your drawing. Our label size guide helps with proportion and placement.
Design tips from our toolmakers
- Die-cast zinc alloy reproduces raised or recessed lines down to roughly 0.3–0.5 mm; very small text is crisper when laser-engraved.
- Enamel colours need a thin metal wall between them, so separate colour areas should not touch.
- Bold, simple shapes read best at small sizes; a logo bar of 20 mm leaves room for a word mark of a few letters.
- Think about the edge: rounded edges feel softer on garments, sharp bevels look more technical.
Our designers turn your logo into a dimensioned technical drawing and a digital proof, so you see exactly what will be tooled before any steel is cut.
Where metal labels are used
Denim and trousers carry small plates on the waistband or coin pocket. Outerwear uses emblems on sleeves, chest pockets and hoods. Bags and backpacks feature riveted badges on flaps and fronts. Caps and beanies take round emblems or slim bars. Knitwear gains a discreet sewn-on bar at the hem. Leather goods, belts and pet accessories use engraved tags, and gift boxes or cosmetic packaging use adhesive-backed plates for a premium touch – see our custom boxes.
From logo to finished plate
- Send your logo, the product, preferred size, metal, finish and fixing method.
- We prepare a technical drawing and digital proof, typically within 24–48 hours.
- After approval we make the tool and a physical sample for you to check.
- Bulk production – casting or stamping, polishing, plating, enamel and inspection – typically takes 10–20 working days after sample approval.
- Delivery across the EU without customs formalities; express options on request.
Minimums usually start at 1,000 pieces per design – ask us about your quantity.
Quality you can rely on
Every batch is inspected for plating colour, surface defects, prong strength and dimensions. All our metal parts are nickel-free, making them suitable for items worn close to the skin. Metal labels pair naturally with leather labels on denim and bags, with hang tags that use matching metal eyelets, and with woven labels inside the garment.
Frequently asked questions
Do your metal logo plates contain nickel?
No. All our metal labels, plates and emblems are nickel-free. A nickel-look finish refers only to its silver-grey colour.
Can a metal emblem show my brand colours?
Yes. Recessed areas can be filled with soft or hard enamel matched to Pantone references and combined with plated finishes such as gold, silver or gunmetal.
Which metal should I choose for an outdoor jacket?
Stainless steel offers the highest corrosion resistance. Zinc alloy with a protective coating is also durable and allows more detailed 3D shapes.
How do I attach a metal plate to a stretchy knit?
Stitch holes are the gentlest option on knitwear. If you prefer prongs, add a backing plate or reinforcement patch so the plate stays straight.
Can each plate carry a different serial number?
Yes. Laser engraving lets us add individual numbers or text to every piece without a separate tool.
Send your logo and tell us what the plate will be fixed to: [email protected], WhatsApp/Viber +359 876 766 050, or our contact page.